How To Set Up The Save - RGBlink VSP 198CVS User Manual

6. System Setup and Operation
How to Save the Parameter

How to Set up the SAVE

Save user mode to the customer for different scene directly call; leave out
the edit operation inconvenience, VSP 198CVS provides ten save
preferences.
1. Press
2. Rotate the knob, and choose the position that will save, press the knob
to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 down of the buttons means
SAVE1~10, you can also press arbitrary button to save. For example,
save to SAVE2, press the button2, the OLED panel will show as follows
after finish saving.
4. Again Press
VSP 198CVS
SAVE
button, the key lights, the SAVE function open.
SAVE TO
—>SAVE 1
Button is on can be saved
Button flashs will be overwrite
SAVE TO
—>SAVE 2 FINISHED!
Button is on can be saved
Button flashs will be overwrite
SAVE
button, the key light off, the SAVE function close.
User Manual 110