Loading The Roll - Oce CS2136 Reference Manual

Loading the Roll

1
Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the
Holder Stopper at the position indicated (b), remove it from the Roll Holder.
2
With the edge of the roll paper facing back as shown, set the roll with the Roll Holder
from the right. Insert the roll firmly until it touches the flange (a) of the Roll Holder.
Important
•
Insert the roll firmly so that there is no gap between the roll and the flange of the
Roll Holder. If there is a gap, it may cause feeding problems.
3
Insert the Holder Stopper from the right in the Roll Holder as shown. Holding it
at the position indicated (b), push it firmly in until the flange (a) of the Holder
8