Oce CS2136 Reference Manual page 31

Responding to Messages
Error Messages
Borderless print not
possible. Check paper
position.
Paper loaded askew.
Straighten paper and
reload.
Cause
The paper is not loaded
correctly.
The printer has received a print
job that cannot be printed using
borderless printing because of
the paper width.
Paper is loaded askew.
31
Corrective Action
Load a roll of the correct size.
(→CD "Paper Sizes")
Reload the roll in the printer.
(→P.8)
Check the size of paper loaded in
the printer.
Follow the steps below to change
the setting of the print job to a width
compatible with borderless printing.
1. Hold down the Stop button for a
second or more to cancel printing.
2. In the printer driver, change the
Roll Paper Width setting to a
width compatible with borderless
printing, and try printing again.
Follow the steps below to reload the
roll.
1. Open the Top Cover.
2. Push the Release Lever back.
3. Align the right edge of the roll
paper parallel to the Paper
Alignment Line.
4. Pull the Release Lever forward.
5. Close the Top Cover.
6. Select the paper type.
(→CD "Selecting the Paper Type
(Roll)")
Follow the steps below to reload the
sheet.
1. Open the Top Cover.
2. Push the Release Lever back.
3. Align the right edge of the
sheet parallel to the right Paper
Alignment Line and the far
edge parallel to the inner paper
alignment line.
4. Pull the Release Lever forward.
5. Close the Top Cover.