Oce CS2136 Reference Manual page 4

Safety Precautions
█Power Supply
•
Always grip the plug to remove the power cable from the power outlet. Pulling on the power
cable could damage the cable and lead to a fire or electrical shock.
•
Never use an extension cord. This could cause a fire or electrical shock.
•
Never use any power source other than 100–240 V. This could cause a fire or electrical shock.
The printer operating conditions are described below. Use the printer under the following
conditions.
Power supply voltage: 100–240 V
Power supply frequency: 50/60Hz
█Cleaning the Printer
•
Always disconnect the power cable from the outlet before cleaning the printer. If the printer is
switched on accidentally, moving parts inside the printer may cause personal injuries.
█ Printhead, Ink Tanks and Maintenance Cartridge
•
Always store consumables in a safe location out of the reach of small children. If a child licks or
ingests ink accidentally, seek medical assistance immediately.
•
Avoid dropping or shaking Printheads, ink tanks, and maintenance cartridges. Spilled ink can
stain clothing and the work area.
•
Never touch the electrical contacts of the Printhead after printing. The contacts become
extremely hot and can cause minor burns.
█Other
•
Never disassemble the printer or attempt repairs. There are high voltage parts inside the
printer that can cause a fire or electrical shock.
•
Never use flammable sprays around the printer. The gas of flammable sprays can cause a fire
or electrical shock, if it contacts high voltage points inside the printer.
•
Never insert your hand into the printer while it is printing. Moving parts inside the printer can
cause injuries.
•
Never place anything on the printer such as small metal objects (paper clips, staples), liquids,
any type of liquid container that contains flammable liquids (alcohol, benzene, etc.). If such
objects fall into the printer, this could cause a fire or electrical shock.
4