Other Messages - Oce CS2136 Reference Manual

Phenomenon
Ink tank: No XX ink
loaded.(Here, XX is an ink
color)

Other messages

Phenomenon
GARO WXXXX (X represents
a number)
Check printed documents.
Cannot print as specified.
Load paper A3/Ledger or
larger.
Cannot print as specified.
Load paper A4/LTR or larger.
Cannot adjust band.
Cause
There is no Ink Tank of the
indicated color in the printer.
There is a problem with the Ink
Tank.
Cause
There is a problem with the
print job.
The document may have been
printed faint.
The loaded paper is too small.
The loaded paper is too small.
The Printhead nozzles are
clogged.
The Printhead and feed
amount cannot be adjusted
when highly transparent film is
loaded.
34
Responding to Messages
Corrective Action
Load or reload the Ink Tank.
(→P.16)
Replace it with a new Ink Tank.
(→P.16)
Corrective Action
Try printing again, using the correct
printer driver.
It is also possible to continue printing
in this state.
If printing is faint, clean the
Printhead.
(→P.16)
Load paper A3/Ledger-sized or
larger.
Load paper A4/Letter-sized or larger.
Follow the steps below to check the
nozzles.
1. Print a test pattern to check the
nozzles.
(→P.25)
2. Clean the Printhead if the nozzles
are clogged.
(→P.26)
We recommend loading a type of
paper that you often use, other than
film, before adjusting the Printhead.
(→CD "Borderless Printing of Photos
and Images")
(→P.27)
Adjust the feed amount manually.
(→CD "Adjusting the Feed Amount
Manually")