Messages Regarding Ink - Oce CS2136 Reference Manual

Responding to Messages
Error Messages
Auto paper cutting is not
possible.
Cannot feed paper.
Roll printing is selected, but
sheets are loaded.
No roll is loaded.
The roll is empty.

Messages regarding ink

Phenomenon
Ink tank is empty.
Low ink. Press OK and
replace ink tank.
Ink Level: Check
Cause
Roll paper cannot be cut using
the Cutter Unit.
There is a paper jam.
The sheet cannot be fed
correctly.
A print job for rolls was sent
when a sheet is loaded.
No roll is loaded.
There is no more paper left on
the roll.
Cause
There is no ink left.
The ink level is low, so
you cannot print, clean
the Printhead, or do other
operations that require ink.
Not much ink is left.
33
Corrective Action
Cut the roll paper manually.
(→CD "Cutting Roll Paper Manually")
Remove the jammed paper.
(→CD "Clearing Jammed Roll
Paper")
Reload the sheet straight, in the
correct position.
(→P.12)
Remove the sheet.
(→CD "Removing the Sheet")
Hold down the Stop button for a
second or more to cancel printing.
Follow the steps below to load the
type and size of roll specified in the
printer driver.
1. Load the roll.
2. If no barcode was printed on the
roll, specify the paper type.
3. If no barcode was printed on the
roll, specify the paper length.
Hold down the Stop button for a
second or more to cancel printing.
Follow the steps below to replace
the used roll with a new roll of the
same type and size.
1. Remove the roll.
2. Load the new roll.
3. If no barcode was printed on the
roll, specify the paper type.
4. If no barcode was printed on the
roll, specify the paper length.
Corrective Action
Open the Ink Tank Cover and
replace the Ink Tank for which the
Ink Lamp is flashing.
(→P.16)
Replace the Ink Tank that is low with
a new Ink Tank.
(→P.16)
Prepare a new Ink Tank.
We recommend replacing the Ink
Tank with a new Ink Tank at this
point if you plan to print banners or
high-quantity jobs.