Oce CS2136 Reference Manual page 30

Error Messages
Cannot adjust with present
paper.
This paper cannot be used.
Borderless print is not
possible with roll loaded.
Check paper size setting in
driver.
Cause
The Printhead and feed
amount cannot be adjusted
when highly transparent film is
loaded.
The loaded paper is too large
for the printer.
Paper that is too small for the
printer has been loaded.
The printer has received a print
job that cannot be printed using
borderless printing.
The paper size as specified
on the printer does not match
the size specified in the printer
driver.
30
Responding to Messages
Corrective Action
We recommend loading a type of
paper that you often use, other than
film, before adjusting the Printhead.
(→P.27)
Adjust the feed amount manually.
(→CD "Adjusting the Feed Amount
Manually")
Load paper of the correct size.
(→CD "Paper Sizes")
Load paper of the correct size.
(→CD "Paper Sizes")
Follow the steps below to change
the settings of the print job to enable
borderless printing.
1. Hold down the Stop button for a
second or more to cancel printing.
2. In the printer driver, change the
settings to a paper size compatible
with borderless printing, and then
try printing again.
(→CD "Borderless Printing of
Photos and Images")
Press the Online button to resume
printing.
However, this may cause a paper
jam or printing problem.
Load paper of the same size as you
have specified in the printer driver.
(→P.8)
(→P.12)
Follow the steps below to ensure
the paper size matches on the
printer and in the printer driver.
1. Hold down the Stop button for a
second or more to cancel printing.
2. Change the paper type in the
printer driver and try printing again.
Press the Online button to resume
printing.
However, this may cause a paper
jam or printing problem.