Oce CS2136 Reference Manual page 38

Phenomenon
An error message
appears on the
Display Screen of
the Control Panel.
Ink unexpectedly
starts filling the
system.
Troubleshooting if the printer stops during a print job
Phenomenon
An error message is
shown on the Display
Screen.
Cause Corrective Action
There is a paper jam. Remove the jammed paper.
(→CD "Clearing Paper Jams")
The printer is offline. If an error message appears on the Display Screen
of the Control Panel, check the message to solve the
error, and then press the Online button on the Control
Panel to bring the printer online.
(→P.29)
If Offline appears on the Display Screen of the
Control Panel, press the Online button to bring the
printer online.
The printer is offline. Check the error message shown on the printer Display
Screen of the Control Panel, Status Monitor
(Windows)
(→P.29)
No paper is loaded. Load paper in the printer.
The paper type is not On the printer Control Panel, specify the type of paper
specified for the paper in the paper source.
source.
For details on types of paper, see the Media Guide.
(→CD "Paper Sizes")
If the wrong paper is specified, stop the print job and
specify the correct paper type before attempting to print
again.
(→P.14)
Ink tank is empty. If a message appears on the Display Screen of the
Control Panel prompting you to replace the ink,
replace the indicated ink tank.
(→P.16)
When the printer Wait until the system has been filled with ink. This
was turned off process may take about ten minutes.
previously, some
cleaning operation was
terminated.
Status
An error message is displayed
during printing.
The last portion of roll paper
was used during a print job, and
paper could not be advanced
because the trailing edge is
taped to the roll.
38
Troubleshooting if You Cannot Print
Corrective Action
Check the error message and take
action as necessary.
(→CD "Error Messages")
Remove the used roll and insert a new
roll.
(→CD "Removing the Roll")
(→P.8)