Troubleshooting If You Cannot Print As Expected; Problems With The Printing Quality - Oce CS2136 Reference Manual

Troubleshooting If You Cannot Print as Expected

Problems with the Printing Quality

Phenomenon
Printing is faint.
Cause
You may be printing on the
wrong side of the paper.
The Printhead nozzles are
clogged.
Other printed documents are still
stacked on the Output Stacker.
Ink has adhered to the needles
that supply ink, which have
become clogged.
Paper is jammed inside the Top
Cover.
During borderless printing, the
ink was not dry enough before
cutting.
42
Corrective Action
Print on the printing surface.
Print a test pattern to check the nozzles
and see if they are clogged.
(→P.25)
The Output Stacker can hold one
sheet.
Remove any printouts from the Output
Stacker before printing the next print
job.
After the Ink Tank has been installed
for at least 24 hours, run Head
Cleaning B.
(→P.26)
Follow the steps below to remove
jammed scraps of paper inside the Top
Cover.
1. Press the Online button to bring the
printer offline.
2. Open the Top Cover and move the
Carriage to the right side.
3. Remove any scraps of paper inside
the Top Cover.
Close the Top Cover.
4.
For tips on clearing paper jams, refer to
the following topics.
(→P.48)
(→P.51)
In the printer menu, specify a longer
time in Roll Drying Time in Paper
Details.
(→CD "Main Menu Settings")