Responding To Messages; Messages Regarding Paper - Oce CS2136 Reference Manual

Responding to Messages

Cross-references are given in the following format.
Information in the Reference Guide
Information in the User's Guide

Messages regarding paper

Error Messages
Regular printing is selected,
but a roll is loaded.
No sheets present.
No sheets are loaded.
End of paper feed. Cannot
feed paper more.
Insufficient paper for job.
( → P.XX)
( → CD "XX")
Cause
A print job for sheets was sent
when a roll is loaded.
A sheet is not loaded.
A sheet is not loaded.
You are pressing the ▲ button
on the Control Panel and
trying to rewind the roll
completely.
The printer has received a print
job longer than the amount of
roll paper left.
29
Corrective Action
Remove the roll.
(→ CD "Removing the Roll from the
Printer")
Hold down the Stop button for a
second or more to cancel printing.
Load paper of the type and size you
have specified in the printer driver.
(→P.12)
Hold down the Stop button for a
second or more to cancel printing.
Load paper of the type and size you
have specified in the printer driver.
(→P.12)
Hold down the Stop button for a
second or more to cancel printing.
Release the ▲ button.
Follow the steps below to replace
the roll.
1. Remove the roll.
2. Load a roll with enough paper left.
3. If no barcode was printed on the
roll, specify the paper type.
4. Select the paper length, unless
a barcode was printed on the
roll and you have deactivated
automatic detection of the
remaining roll paper.
Hold down the Stop button for a
second or more to cancel printing.
Press the Online button to resume
printing.
However, the roll paper will run out
during the print job, and you will not
be able to print all of the document.