Table of Contents
Advertisement
INSTALLATION OF CAR ANCHOR FITTING
Consult the vehicle owner's handbook for location of anchorage fittings or anchorage points and the
possible use of spacers. Some vehicles may have an anchor fitting fitted by the vehicle manufacturer.
If anchorage points cannot be found refer to car manufacturer or local child restraint fitting station or
traffic authority for optimum position of anchorage point and the use of spacers.
UPPER ANCHORAGE STRAP
IMPORTANT:
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS THE RISK OF
INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE ANCHOR FITTING. ALWAYS ENSURE
THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE ANCHOR FITTING AND NOT
HOOKED OR FITTED TO ANY OTHER OBJECT BEFORE EACH USE OF THE RESTRAINT. THIS
IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS, HATCH BACKS
OR VEHICLES WITHOUT A FIXED PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT
VISIBLE.
IMPORTANT INSTALLATION NOTE:
In some vehicles the anchor fitting in the rear vertical panel can only be installed in one way. Please
refer to vehicle owner's handbook or a child restraint fitting station for correct method.
64
Instructions for Installation & Use - Series No. 8100/A/2010
INSTALLATION OF CAR ANCHOR FITTING
45°
Adjustable upper
Anchorage strap.
The shaded areas of this diagram illustrate the possible locations of the anchor fitting. Within each
shaded area is an anchor fitting showing the correct way to install the fitting. Ensure the anchor fitting
is aligned as illustrated unless stated otherwise in the vehicle owner's handbook.
Instructions for Installation & Use - Series No. 8100/A/2010
Extension Strap distance to be measured.
Length 300mm (Use Safe-n-Sound part 0035).
Length 600mm (Use Safe-n-Sound part 0036).
Available from all major child restraint retailers.
Distance to measure to
the anchor point
Front of Vehicle
65
Hide quick links:
Advertisement
Table of Contents
