Table of Contents
Advertisement
INSTALLATION OF CAR
ANCHOR FITTING
Consult the vehicle owner's handbook for location of anchorage fittings or anchorage points and the possible
use of spacers. Some vehicles may have an anchor fitting fitted by the vehicle manufacturer. If anchorage points
cannot be found refer to car manufacturer or local child restraint fitting station or traffic authority for optimum
position of anchorage point and the use of spacers.
TOP TETHER STRAP
IMPORTANT:
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS THE RISK OF INCORRECT FITMENT OF
THE ATTACHMENT CLIP TO THE ANCHOR FITTING. ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY
ENGAGED TO THE ANCHOR FITTING AND NOT HOOKED OR FITTED TO ANY OTHER OBJECT BEFORE EACH USE
OF THE RESTRAINT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS, HATCH
BACKS OR VEHICLES WITHOUT A FIXED PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT INSTALLATION NOTE:
In some vehicles the anchor fitting in the rear vertical panel can only be installed in one way. Please refer to
vehicle owner's handbook or a child restraint fitting station for correct method.
62
Advertisement
Table of Contents
