Xdsl Port Setting Screen - ZyXEL Communications IES-1248-51 User Manual

Table 16 xDSL Port Setup (continued)
LABEL
Packet Filter
Paste
Port
Active
Customer Info
Customer Tel
Profile
Mode
Channels

16.7.1 xDSL Port Setting Screen

To open this screen, click Basic Setting, xDSL Port Setup, and then click a port's index
number.
Chapter 16 xDSL Port Setup
DESCRIPTION
Select this check box to copy this port's packet filter settings. These are
configured in the Packet Filtering screen (see
See Copy Port.
This field shows each ADSL port number.
This field shows the active status of this port. The port may be enabled or
disabled. This is configured in the xDSL Port Setting screen (see
16.7.1 on page 113).
This field shows the customer information provided for this port. This is
configured in the xDSL Port Setting screen (see
This field shows the customer telephone number provided for this port. This is
configured in the xDSL Port Setting screen (see
This field shows which profile is assigned to this port. This is configured in the
xDSL Port Setting screen (see
This field shows which ADSL operational mode the port is set to use. This is
configured in the xDSL Port Setting screen (see
This field displays the number of PVCs (Permanent Virtual Circuits) that are
configured for this port. This is configured in the VC Setup screen (see
16.9 on page 118).
IES-1248-51 User's Guide
Chapter 22 on page
Section 16.7.1 on page
Section 16.7.1 on page
Section 16.7.1 on page 113).
Section 16.7.1 on page
161).
Section
113).
113).
113).
Section
113