Trap Community Command; Trap Destination Set Command; Show Snmp Settings Command - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51 User's Guide
where
<ip>
Use this command to add the host IP address to the list of trusted hosts. If you enter a trusted
host, your IES-1248-51 will only respond to SNMP messages from this address. If you leave
the trusted host set to 0.0.0.0 (default), the IES-1248-51 will respond to all SNMP messages it
receives, regardless of source.

48.1.4 Trap Community Command

Syntax:
ras> sys snmp trapcommunity <community>
where
<community>
Enter this command with the community to set the password.

48.1.5 Trap Destination Set Command

Syntax:
ras> sys snmp trapdst set <index> <ip> [<port>]
where
<index>
<ip>
[<port>]
Use this command specify the IP address (and port number) of a trap server to which the IES-
1248-51 sends SNMP traps. If you leave the trap destination set to 0.0.0.0 (default), the IES-
1248-51 will not send any SNMP traps.

48.1.6 Show SNMP Settings Command

Syntax:
ras> sys snmp show
300
The IP address of a trusted host.
=
The password sent with each trap to the SNMP manager.
=
The number of the trap server (1~4).
=
The IP address of the trap server.
=
The port number upon which the trap server listens for SNMP
=
traps. The IES-1248-51 uses the default of 162 if you do not
specify a trap port.
Chapter 48 SNMP