Chapter 14 Ip Setup; Figure 51 Ip Setup; Table 13 Ip Setup - ZyXEL Communications IES-1248-51 User Manual

The IP Setup screen allows you to configure a device IP address, subnet mask and DNS
(domain name server) for management purposes.
To open this screen, click Basic Setting, IP Setup.

Figure 51 IP Setup

The following table describes the labels in this screen.

Table 13 IP Setup

LABEL
IP
IP Mask
Apply IP setting
Cancel
Default Gateway
Apply Gateway
setting
Cancel

Chapter 14 IP Setup

C
DESCRIPTION
Enter the IP address of your IES-1248-51 in dotted decimal notation for example
1.2.3.4.
Enter the IP subnet mask of your IES-1248-51 in dotted decimal notation for
example 255.255.255.0.
Click Apply IP setting to save your changes to the device's IP address and/or
subnet mask to the IES-1248-51's volatile memory. The IES-1248-51 loses
these changes if it is turned off or loses power, so use the Config Save link on
the navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Click Cancel to begin configuring the fields again.
Enter the IP address of the default outgoing gateway in dotted decimal notation.
Click Apply Gateway setting to save your changes to the device's IP address
and/or subnet mask to the IES-1248-51's volatile memory. The IES-1248-51
loses these changes if it is turned off or loses power, so use the Config Save
link on the navigation panel to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to begin configuring the fields again.
IES-1248-51 User's Guide
H A P T E R
IP Setup
1 4
105