ZyXEL Communications IES-1248-51 User Manual page 239

Table 70 Commands (continued)
CLASS COMMAND
monitor
adsl show
adsl linedata
adsl lineinfo
adsl lineperf
adsl linerate
adsl 15mperf
adsl 1dayperf
igmpsnoop
rstp
vlan
mac
port
dot1x
enet
ip
config
show
save
restore
exit
Chapter 38 Commands
PARAMETERS
[portlist]
<portlist>
<portlist>
<portlist>
<portlist>
<portlist> [count
<0..96>]
<portlist>
<portlist> [<vpi>
<vci>] [clear]
[portlist]
<sys|sw|adsl|ip|st
at|all> [nopause]
IES-1248-51 User's Guide
DESCRIPTION
Displays hardware monitor status.
Displays ADSL port connection
status.
Displays the line data load per
symbol (tone).
Displays the info of the specified
ADSL ports.
Displays the performance
statistics of the specified ADSL
port.
Displays the line rate.
Displays line performance
statistics for the current and
previous 15-minute periods.
Displays line performance
statistics for the current and
previous 24 hours.
Displays IGMP snooping statistics.
Displays current VLANs.
Displays current MAC address
forwarding table.
This command displays and/or
erases port statistics.
Displays Ethernet port settings
and statistics.
Displays a management port's
status and performance data.
Displays the device's
configuration.
Saves the current configuration.
Reloads the factory default
configuration.
Ends the console or telnet
session.
P
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/L
M/~
M/L
H/H
H/H
L/L
239