Log Format; Table 64 Log Format - ZyXEL Communications IES-1248-51 User Manual

Table 63 Diagnostic (continued)
LABEL
PMM
ToneDiag

35.2 Log Format

The common format of the system logs is:
.
message>

Table 64 Log Format

LABEL
<item no>
<time>
<process>
<type>
<log message>
Chapter 35 Diagnostic
DESCRIPTION
Select a port number from the Port drop-down list box and a power
management mode from the Mode drop-down list box and click Set PMM Mode
to have the specified port use the specified power management mode.
Select L0 to turn off power management on the port.
Select L2 to scale back the power usage to just support the transmission rate
that the subscriber is using.
Select L2 to have the ADSL connection use power saving mode and reduce the
rate when there is no traffic. The rate comes back up when there is traffic.
The ADSL port must be set to ADSL2 or ADSL2+ ADSL operational mode.
Click Get PMM Mode to display which power mode the ADSL port is currently
set to use.
Select a port number from the Port drop-down list box. The ADSL port must be
set to ADSL2 or ADSL2+ ADSL operational mode and have a connection. Click
Get ToneDiag data to display the ADSL port's tone diagnostics. The tone
diagnostic information displays in the format defined in the ITU-T G.992.3
standard. Use the information to analyze problems with the physical ADSL line.
Note: ToneDiag is faster than the LDM test but displays less
information.
<item no> <time> <process> <type> <log
DESCRIPTION
This is the index number of the log entry.
This is the time and date when the log was created.
This is the process that created the log.
This identifies what kind of log it is. "INFO" identifies an information log. "WARN"
identifies a warning log.
This is the log's detailed information (see
IES-1248-51 User's Guide
Table 65 on page 218).
217