Chapter 30 Syslog; Syslog; Syslog Screen; Figure 98 Syslog - ZyXEL Communications IES-1248-51 User Manual

This chapter explains how to set the syslog parameters.

30.1 Syslog

The syslog feature sends logs to an external syslog server.

30.2 SysLog Screen

To open this screen, click Advanced Application, SysLog.

Figure 98 SysLog

The following table describes the labels in this screen.

Table 50 SysLog

LABEL
Enable Unix Syslog
Syslog Server IP
Log Facility
Apply
Cancel

Chapter 30 Syslog

C
DESCRIPTION
Select this check box to activate syslog (system logging) and then configure the
syslog parameters described in the following fields.
Enter the IP address of the syslog server.
Select an option from the drop-down list box. The log facility allows you to log the
message to different files in the server. Please see the documentation of your
syslog program for more details.
Click Apply to save your changes to the IES-1248-51's volatile memory. The
IES-1248-51 loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
IES-1248-51 User's Guide
H A P T E R
Syslog
3 0
191