Alarm Profile Set Command; Figure 223 Alarm Profile Show Command Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51 User's Guide
The following example displays the default alarm profile (DEFVAL).

Figure 223 Alarm Profile Show Command Example

ras> adsl alarmprofile show DEFVAL
01. DEFVAL
Thresh15MinLofs
Thresh15MinLoss
Thresh15MinLols
Thresh15MinLprs
Thresh15MinESs
ThreshFastRateUp
ThreshInterleaveRateUp
ThreshFastRateDown
ThreshInterleaveRateDown
InitFailureTrap(1-enable, 2-disable):
Thresh15MinFailedFast
Thresh15MinSes
Thresh15MinUas

49.3.2 Alarm Profile Set Command

Syntax:
ras> adsl alarmprofile set<profile> [<atuc lofs> <atur lofs> <atuc loss>
<atur loss> <atuc lols> <atuc lprs> <atur lprs> <atuc ess> <atur ess> <atuc
fast rateup> <atur fast rateup> <atuc interleave rateup> <atur interleave
rateup> <atuc fast ratedown> <atur fast ratedown> <atuc interleave ratedown>
<atur interleave ratedown> <init fail enable> <atuc fail fast> <atuc ses>
<atur ses> <atuc uas> <atur uas>]
where
<profile>
atuc
atur
<atuc lofs>
<atur lofs>
<atuc loss>
<atur loss>
<atuc lols>
<atuc lprs>
<atur lprs>
334
---------- ----------
(sec):
(sec):
(sec):
:
(sec):
(bps):
(bps):
(bps):
(bps):
:
(sec):
(sec):
A name for the alarm profile (up to 31 ASCII characters).
=
Upstream. These parameters are for the connection (or traffic)
=
coming from the subscriber's device to the IES-1248-51.
Downstream. These parameters are for the connection (or
=
traffic) going from the IES-1248-51 to the subscriber's device.
The number of Loss Of Frame Seconds that are permitted to
=
occur within 15 minutes.
The number of Loss Of Signal Seconds that are permitted to
=
occur within 15 minutes.
The number of Loss Of Link seconds that are permitted to occur
=
within 15 minutes.
The Number of times a Loss of Power is permitted to occur (on
=
the ATUR) within 15 minutes.
ATU-C ATU-R
0 0
0 0
0 ---
0 0
0 0
0 0
0 0
0 0
0 0
2 ---
0 ---
0 0
0 0
Chapter 49 ADSL Commands