ZyXEL Communications IES-1248-51 User Manual page 228

IES-1248-51 User's Guide
Table 70 Commands (continued)
CLASS COMMAND
timeserver set
timeserver sync
log show
log clear
wdog show
wdog set
monitor show
monitor enable
monitor disable
monitor vlimit
monitor tlimit
monitor flimit
monitor extalm
user online
user server
user enable
user disable
228
PARAMETERS
<daytime|time|ntp>
<ip> <utc[<+|-
>0100~1200]>
[nosync]
<msec|0:disable>
<idx> <high> <low>
<idx> <high> <low>
<idx> <high> <low>
<idx> <name>
<ip> <port>
<secret>
<name>
<name>
DESCRIPTION
Sets the time service protocol,
time server's IP address and the
device's time zone.
Retrieves the date and time from
the time server.
Displays the device's logs.
Clears the device's logs.
Displays the current watchdog
firmware protection feature status
and timer.
Sets the watchdog count. 0 turns
the watchdog off.
Displays the hardware monitor's
statistics.
Turns the hardware monitor on.
Turns the hardware monitor off.
Sets the maximum (<high>) or
minimum (<low>) voltage at the
specified voltage sensor. You can
specify a voltage with up to three
digits after a decimal point (0.941
for example).
Normal voltage at each sensor:
Idx: 1=1.0v, 2=1.8v, 3=3.3v, 4=24v
Sets the maximum (<high>) or
minimum (<low>) temperature at
the specified temperature sensor.
You can specify a temperature
with up to three digits after a
decimal point (-50.025 for
example).
Temperature sensor locations: Idx:
1=DSL, 2=CPU, 3=HW monitor
Sets the maximum (<high>) or
minimum (<low>) fan revs per
minute (RPM) at the specified fan
(<idx>).
Idx: 1=Fan 1, 2=Fan 2, 3=Fan 3.
Set external alarm name.
Displays online user info.
Set remote authentication server
IP address and secret
Turns on the specified user name
of multi-login.
Turns off the specified user name
of multi-login.
Chapter 38 Commands
P
H/H
H/H
M/L
H/H
H/~
H/~
L/L
H/H
H/H
H/H
H/H
H/H
H/H
M/~
H/H
H/H
H/H