8 Wait for the
on your terminal.
9 This is an example Xmodem configuration upload using HyperTerminal. Click Transfer,
then Send File to display the following screen.
Figure 256 Example Xmodem Upload
Type the firmware file's location, or click Browse to search for it. Choose the 1K
Xmodem protocol. Then click Send.
10After a successful firmware upload, type atgo to restart the IES-1248-51. The console
port speed automatically changes back to 9600 bps when the IES-1248-51 restarts.
Chapter 51 Troubleshooting
Starting XMODEM upload
IES-1248-51 User's Guide
message before activating XMODEM upload
369