ZyXEL Communications IES-1248-51 User Manual page 238

IES-1248-51 User's Guide
Table 70 Commands (continued)
CLASS COMMAND
enet enable
enet disable
enet reset
smcast show
smcast set
smcast delete
isolation show
isolation enable
isolation disable
isolation
daisychain
isolation
standalone
ip
show
arp show
arp flush
set
gateway
route show
route set
route set
route delete
route flush
ping
statistics
238
PARAMETERS
<portlist>
<portlist>
<portlist>
<adsl_port> <mac>
<join|leave>
<mac>
<ip>[/netmask]
<gateway ip>
<dst ip>[/netmask]
<gateway ip>
[metric] <name>
default <gateway
ip> <metric>
<dst ip>[/netmask]
<ip> [count]
DESCRIPTION
Turns on the specified Ethernet
port(s).
Turns off the specified Ethernet
port(s).
Display all MAC addresses joined
to ADSL ports.
Use join/leave to add/ remove
multicast MAC addresses on
specified ADSL ports, a range of
ADSL ports or all ADSL ports.
MAC example: 01005E010203
Removes a static multicast filter
entry by deleting the associated
MAC address.
Displays the subscriber isolation
feature's current setting.
Turns the subscriber isolation
feature on.
Turns the subscriber isolation
feature off.
Displays the management IP
address settings.
Displays the device's IP Address
Resolution Protocol (ARP) table.
Clears the device's IP Address
Resolution Protocol (ARP) table.
Sets the management IP address
and subnet mask.
Sets the IP address of the device's
default gateway.
Displays the routing table.
Adds a routing table entry.
Sets the device's default route.
Removes a routing table entry.
Clears the routing table.
Pings a remote host.
Chapter 38 Commands
P
H/H
H/H
H/H
M/L
H/H
H/H
M/L
H/H
H/H
H/H
H/H
M/L
M/L
H/H
H/H
H/H
M/L
H/H
H/H
H/H
H/~
M/L