Remote Entry Code Time Zone Enable / Disable - DKS 1802 Installation & Owner's Manual

4.2 System Administrator Continued

4.2.4 Remote Entry Code Time Zone Enable / Disable

The entry code time zones can be turned OFF (disable) or ON (enable) remotely
from a touch-tone telephone at any time without changing the time zone
boundaries. To program the time zone boundaries, see sections 3.5.3 and 3.5.4.
Entry code time zones can also be turned off or on at the system keypad by
skipping step 1 and proceeding directly to step 2 in the sequence below.
1. Call the telephone number that the entry system is installed on. The system will answer with a short tone (beep heard).
Note: the number of rings before the system answers is dependent on the programming in section 3.1.9.
2. Press 36 for FOUR-digit entry code time zones, or
*
MASTER CODE (beep heard).
3. Press 0 (beep heard) to turn the time zone OFF, or press 1
*
3. Hang up the phone or if at the system keypad, press 0 # together (beeeeeep).
4.2.5 Remote Automatic Relay Time Zone Enable / Disable
The four time zones that automatically activate and deactivate the relays can be turned OFF (disable) or ON (enable) remotely
from a touch-tone telephone at any time without changing the time zone programming. To program the automatic relay activa-
tion time zones, see section 3.5.2. The four Automatic relay time zones can also be turned off or on at the system keypad by
skipping step 1 and proceeding directly to step 2 in the sequence below.
1. Call the telephone number that the entry system is installed on. The system will answer with a short tone (beep heard).
Note: the number of rings before the system answers is dependent on the programming in section 3.1.9.
2. Press 35 and enter the four-digit MASTER CODE (beep heard).
*
3. Enter the single-digit time zone number that you want to turn OFF or ON, then press
Note: Refer to section 3.5 to determine which time zones have been programmed into the system or see log tables in back of
this manual.
4. Press 0 (beep heard) to turn the time zone OFF, or press 1
*
5. Hang up the phone or if at the system keypad, press 0 # together (beeeeeep).
40
37 for FIVE-digit entry code time zones, then enter the four-digit
*
(beep heard) to turn the time zone ON.
*
(beep heard) to turn the time zone ON.
*
(beep heard).
*
1802-065-D-10-14