Delete A Single Name; Delete All Names; Caution 32 3.3.8 - DKS 1802 Installation & Owner's Manual

3.3.7 Delete a Single Name

This program sequence is useful to delete a SINGLE name that has been programmed into the directory.
MNO MNO JKL JKL
1. Press and enter your four-digit MASTER CODE
6 6 5 5
2. Press to keep the name, OR
3. Repeat steps 2 and 3 to keep skipping or erasing names.
OPER OPER
4. Press together to end this programming sequence.
0 0
The LCD display will read: SORTING.
System alphabetizes the names. This may take a few minutes. Sorting is complete when a long (beeeeeep) is heard.

3.3.8 Delete ALL Names

This programming step deletes ALL names that have been programmed into the directory.
CAUTION: This programming CANNOT be UNDONE!
MNO MNO PQRS PQRS
1. Press and enter your four-digit MASTER CODE
6 6 7 7
The LCD display will read: 1=Y 0=N
SP SP
2. Press to erase all names, OR
1 1
SP SP
3. When you press
1 1
The LCD display will read: ERASING.
Erasing is complete when a long (beeeeeep) is heard. This CANNOT be UNDONE!
32
OPER OPER
to erase the name. The next name is displayed.
0 0
OPER OPER
to keep all names.
0 0
in step 2,
? ? ? ? ? ? ? ?
(beep).
? ? ? ? ? ? ? ?
(beep).
1802-065-D-10-14