Entry Code Time Zone Enable / Disable; Auto Relay Activation Time Zone Enable / Disable - DKS 1803 Owner's Manual

5.2.4 Entry Code Time Zone Enable / Disable

The entry code time zones can be turned off or on remotely from a touch-tone telephone at any time
without changing the time zone boundaries. To program the time zone boundaries, see sections
2.4.3 and 2.4.4. Entry code time zones can also be turned off or on at the system keypad by skipping
step 1 and proceeding directly to step 2 in the sequence below.
1. Call the telephone number that the entry system is installed on. The system will answer
with a short tone (beep).
dependent on the programming in 3.1.8.

2. Press for four-digit entry code time zones or press
time zones.
3. Enter the four-digit master code

4. Press (beep) to turn the time zone OFF, or press
ON.
5. Hang up or if at the system keypad, press
5.2.5 Auto Relay Time Zone Enable / Disable
The four time zones that automatically activate and deactivate the relays can be turned off or on from
a touch-tone telephone at any time without changing the time zone boundaries. To program the auto
relay activation time zone boundaries, see section 2.4.2. Auto relay time zone boundaries can also
be turned off or on at the system keypad by skipping step 1 and proceeding directly to step 2 in the
sequence below.
1. Call the telephone number that the entry system is installed on. The system will answer
with a short tone (beep).
dependent on the programming in 3.1.8.

2. Press and enter the four-digit master code
3. Enter the time zone number

4. Press (beep) to turn the time zone OFF, or press
ON.
5. Hang up or if at the system keypad, press 0# together (beeeeeep).
Note: the number of rings before the system answers is
BBBB
(beep).

together (beeeeeep).
Note: the number of rings before the system answers is
BBBB
B
that you want to turn off or on, then press
45

for five-digit entry code

(beep) to turn the time zone
(beep).
(beep).

(beep) to turn the time zone