Four-Digit Entry Codes Time Zone - DKS 1802 Installation & Owner's Manual

Telephone entry systems
Hide thumbs Also See for 1802:
Table of Contents

Advertisement

3.5.3 Four-Digit Entry Codes Time Zone

This programming sequence sets up ONE time zone for the FOUR-digit entry codes to activate the system relays. This time
zone uses a range of four-digit entry codes (Boundary numbers) and can be programmed for certain days of the week. This time
zone can be turned ON and turned OFF after it is programmed (see operating instructions 4.2.4 to turn ON or OFF the
programmed entry code time zone).
DEF
DEF
MNO
MNO
1. Press
and enter your four-digit MASTER CODE
3 3
6 6
SP
SP
2. Press
(beep) to turn time zone ON, OR
1 1
3. Enter the four-digit BEGINNING hour and minutes, then press
DO NOT use military (24 hour) time format, simply enter the hour (2 digits) and the minutes (2 digits). For example, 8:30 is
entered as 0830. AM or PM gets set on the next step.
OPER
OPER
4. Press
(beep) for AM, OR
0 0
5. Enter the four-digit ENDING hour and minutes, then press
DO NOT use military (24 hour) time format, simply enter the hour (2 digits) and the minutes (2 digits). For example, 8:30 is
entered as 0830. AM or PM gets set on the next step.
OPER
OPER
6. Press
(beep) for AM, OR
0 0
7. Enter the seven-digit days of the week, then press
All seven digits MUST be entered, to skip any days of the week the time zone will NOT be active, enter # in place of a day.
Example 1: to have a time zone active on Saturday and Sunday ONLY (Sun = 1, Sat = 7), enter 1 7 # # # # #.
Example 2: to have a time zone active on Monday thru Friday ONLY (Mon = 2, Tues = 3, ......Fri = 6), enter 2 3 4 5 6 # #.
8. Enter the LOWER four-digit entry codes boundary number, then press
Entry codes LOWER than this number will NOT activate relays when the entry code time zone is ON.
9. Enter the UPPER four-digit entry codes boundary number, then press
Entry codes HIGHER than this number will NOT activate relays when the entry code time zone is ON.
OPER
OPER
10. Press
together to end this programming sequence (beeeeeep).
0 0
36
? ?
OPER
OPER
(beep) to turn time zone OFF.
0 0
SP
SP
(beep) for PM.
1 1
(beep).
SP
SP
(beep) for PM.
1 1
(beeeeeep). (Sun = 1, Mon = 2, .....Sat = 7)
? ?
? ?
? ?
(beep).
(beep).
(beep).
(beep).
1802-065-D-10-14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents