Installing The Lamp Start Cover - Barco Galaxy NH-12 Service Manual

Image 4-28
3. Slide the cover towards the rear side of the projector (see arrow 2 on the picture above)
4. Slide down the cover to remove the bottom feet from their slots (see arrow 3 on the picture above)
Image 4-29
Lamp start cover removed
4.5.2

Installing the lamp start cover

Necessary tools
Phillips screwdriver Ph1
How to install the lamp start cover?
1. Put the cover — slightly tilted — in the right position (see 1 and 2 on the picture)
R59770141 GALAXY NH-12 20/02/2008
4. Covers
23