Barco Galaxy NH-12 Service Manual page 47

7. Electronic parts and servicing procedures
Necessary tools
Torx screwdriver T10
How to replace the mains pulse filter?
1. Unscrew the right front foot of the projector (or remove it completely)
Image 7-11
Mains input assembly: removal
2. At the bottom of the projector, remove the three screws fixing the mains input assembly (see picture above)
3. Unplug the wires
4. Take out the mains input assembly
5. Unplug the connectors
Image 7-12
Mains pulse filter: connectors
6. Remove the fixing screws
Image 7-13
Mains pulse filter: fixing screws
7. Remove the mains pulse filter
R59770141 GALAXY NH-12 20/02/2008 43