Lamp Start Cover; Removing The Lamp Start Cover - Barco Galaxy NH-12 Service Manual

4. Covers
4.5

Lamp start cover

Introduction
The lamp start cover gives access to the SPG.
Before the lamp start cover can be taken off, the rear cover of the projector must be removed. See the con-
cerning chapter to remove/install the rear cover.
Picture
Image 4-26
Lamp start cover
4.5.1

Removing the lamp start cover

Necessary tools
Phillips screwdriver Ph1
How to remove the lamp start cover?
1. Remove both screws on the top side of the lamp start cover
Image 4-27
Lamp start cover: fixing screws
2. Tilt the top side of the cover down over 45° (see arrow 1 on the picture)
22 R59770141 GALAXY NH-12 20/02/2008