Installing The Lamp - Barco Galaxy NH-12 Service Manual

8. Optical parts and servicing procedures
8.2.3

Installing the lamp

Necessary tools
Slotted screwdriver 4 mm or 6 mm
How to install the lamp?
1. Put the lamp in that position where the lamp feet fit the slider slot
Tip: Use the top handle of the lamp
Image 8-7
Lamp feet
2. Push the lamp down until it is at the bottom of the projector
Image 8-9
Lamp: installation
3. Slide the lamp to the right side of the projector (= towards the connector)
Image 8-10
Lamp: installation
4. Firmly push the lamp to plug in the connectors
120
Image 8-8
Lamp house: slider slot
R59770141 GALAXY NH-12 20/02/2008