Barco Galaxy NH-12 Service Manual page 140

8. Optical parts and servicing procedures
Image 8-45
Engine: fixing screws to the projector
3. Fix the engine to the lens holder using two screws
Image 8-46
Engine: fixing screws to the lens holder
Note: In the drawing above, the lens holder has been lifted for visibility. In reality, the lens holder can stay in the projector.
4. Remove the handle from the engine (if available)
5. Make the connections to the preformatter board
- 6 signal cables
2 signals cables going to the red formatter
o
2 signal cables going to the green formatter
o
2 signal cables going to the blue formatter
o
- 3 power cables
1 cable to the green formatter
o
1 cable to the red formatter
o
1 cable to the blue formatter
o
136 R59770141 GALAXY NH-12 20/02/2008