Barco Galaxy NH-12 Service Manual page 36

5. Software
• device: this is the projector type
- iCon NH-12
- iD LH-12
- Galaxy NH-12
• version: indicates the version
- two first digits (e.g. 00): major revision
- second pair of digits (e.g. 10): minor revision
- last four digits (e.g. 0001): build number
Necessary tools
• ethernet connection to the projector
• latest projector software version (= upgrade tool)
How to upgrade the projector?
1. Download the latest projector software version from the PartnerZone or from the Barco intranet
2. Save this upgrade file on a computer which can be connected to the same (local) network as the projector
3. Make sure that the projector is in standby or in active state
4. Connect the computer to the local network in which the projector is included
5. Double click the upgrade tool
6. Enter the projector's IP address or host name (see LCD module on the projector) and hit OK
Image 5-2
Upgrading the projector (1)
7. Compare the version of the downloaded upgrade tool to the actual installed version
Image 5-3
Upgrading the projector (2)
8. If the downloaded upgrade tool is a newer version than the installed software version, hit Yes
9. The progression details of the upgrade can be seen in the window
32 R59770141 GALAXY NH-12 20/02/2008