Barco Galaxy NH-12 Service Manual page 37

Image 5-4
Upgrading the projector (3)
Caution: Do not switch off the projector or the computer during the upgrade procedure!
Note: In case of problems during the upgrade procedure, the following two buttons can be used for diagnostics:
Save text will save the text inside the Barco Networked Projector Upgrade Tool in a file
Screen shot will save a screen shot of the projected image at that particular time.
10.When the upgrade is successful, a green ellipse appears at the bottom of the window and an information window pops up
Image 5-5
Upgrading the projector (4)
11. Hit OK to finish the upgrade
12.Reboot the projector
a) Put the projector in standby
b) When the cooling cycle is finished, switch off the projector (main switch)
c) Switch on the projector (main switch)
If the upgrade fails, a red ellipse appears at the bottom of the window and a message pops up. Restart the
procedure.
Image 5-6
Upgrading the projector: failure
R59770141 GALAXY NH-12 20/02/2008
5. Software
33