Removing The Engine - Barco Galaxy NH-12 Service Manual

Picture
Image 8-38
Engine
8.8.2

Removing the engine

Necessary tools
Torx screwdriver T20
How to remove the engine?
1. Remove the covers (see concerning chapters):
- rear cover
- top cover
- engine fan cover 1
- engine fan cover 2
2. Remove the engine controller frame assembly (see concerning chapter)
3. Remove fan unit 1 (= fan LPS vertical) (see concerning chapter)
4. Remove fan unit 2 (= assembly fan engine top and fan engine bottom) (see concerning chapter)
5. Remove both screws fixing the engine to the lens holder
Image 8-39
Screws fixing the engine to the lens holder
Note: In the drawing above, the lens holder has been lifted for visibility. In reality, the lens holder can stay in the projector.
6. Remove both screws fixing the engine to the projector frame
R59770141 GALAXY NH-12 20/02/2008
8. Optical parts and servicing procedures
133