7. Electronic parts and servicing procedures
Image 7-2
Mains input assembly: removal
2. At the bottom of the projector, remove the three screws fixing the mains input assembly (see picture above)
3. Unplug the wires
4. Take out the mains input assembly
5. Unplug the connectors of the mains switch
Image 7-3
Mains switch: connectors
6. Push both clamps to release the mains switch and slide it out
Image 7-4
Mains switch: clamps
Installing the new mains switch: follow the procedure above in reverse order.
40
Image 7-5
Mains switch: slide out to remove
R59770141 GALAXY NH-12 20/02/2008