Barco Galaxy NH-12 Service Manual page 67

How to remove the light feedback board?
1. Remove the rear cover (see concerning chapter)
2. Remove the fixing screws of the cover of the light feedback board
Image 7-52
Light feedback board: fixing screws of the cover
3. Gently flip over the cover of the light feedback board
Caution: The light feedback board is fixed to this cover: by pulling away the cover too far, connectors can be damaged.
Image 7-53
Light feedback board: cover flipped over
4. Disconnect the wires on the light feedback board
- J1: to LPS
- J2: to sensor
- J3: to LPS
Image 7-54
Light feedback board: connectors
5. Remove the fixing screws of the light feedback board to take it off.
R59770141 GALAXY NH-12 20/02/2008
7. Electronic parts and servicing procedures
63