Disassembling The Projector For Cover Replacement; Step By Step Actions; Disassembling Steps; Removing The Lamp Cover - Barco SLM R12 Plus Service Manual

28. Upgrade with Air Filters

28.2 Disassembling the projector for Cover replacement

Overview
•

Step by step actions

•

Disassembling Steps

28.2.1 Step by step actions
Disassembling the projector
1. Remove the lamp cover.
2. Remove the Input assembly.
3. Remove the rear cover.
4. Remove the top cover.
5. Remove 2 stacking points
6. Remove the carrying handle.
7. Remove the bottom cover
28.2.2 Disassembling Steps

28.2.2.1 Removing the lamp cover

Necessary tools
A flatblade screwdriver of 5 mm
How to remove
1. Turn with a screwdriver the side panel captive screw (A) a quarter turn counter clockwise.
Image 28-3
Unlocking the side cover
2. Pull the right side of the panel towards you and next to the right to remove.
258
A
R5976820 SLM R12+ PERFORMER 08/03/2005