Installing The Engine - Barco Galaxy NH-12 Service Manual

Image 8-43
Engine: connectors
8. Release the screws fixing the grounding wires next to the connectors mentioned in the previous step:
- 3 grounding wires (signal)
- grounding wires (power)
9. Fix the handle to the engine (if available)
10.Gently lift the engine to remove it
8.8.3

Installing the engine

Necessary tools
Torx screwdriver T20
How to install the engine?
1. Gently put the engine in the projector and align it using the alignment pins located next to the fixing screws
Image 8-44
Engine: alignment pin 1
Note: Alignment pin 2 is located next to fixing screw 2.
2. Fix the engine to the projector using two screws
R59770141 GALAXY NH-12 20/02/2008
8. Optical parts and servicing procedures
135