Installing The Lamp; Lamp Feet; Lamp House: Slider Slot; Lamp: Installation - Barco Galaxy NW-12 User Manual

8.6.5

Installing the lamp

Necessary tools
Slotted screwdriver 4 mm or 6 mm
How to install the lamp?
1. Put the lamp in that position where the lamp feet fit the slider slot
Tip: Use the top handle of the lamp
Image 8-13

Lamp feet

2. Push the lamp down until it is at the bottom of the projector
Image 8-15

Lamp: installation

3. Slide the lamp to the right side of the projector (= towards the connector)
Image 8-16
Lamp: installation
4. Push the lamp to plug in the connectors
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013
Image 8-14

Lamp house: slider slot

8. Maintenance
197