8.6.5
Installing the lamp
Necessary tools
Slotted screwdriver 4 mm or 6 mm
How to install the lamp?
1. Put the lamp in that position where the lamp feet fit the slider slot
Tip:
Use the top handle of the lamp
Image 8-13
Lamp feet
2. Push the lamp down until it is at the bottom of the projector
Image 8-15
Lamp: installation
3. Slide the lamp to the right side of the projector (= towards the connector)
Image 8-16
Lamp: installation
4. Firmly push the lamp to plug in the connectors
R59770121 NH-12 04/05/2011
Image 8-14
Lamp house: slider slot
8. Maintenance
167