Lamp Installation; Open Lamp Locking System; Lamp Insertion (Sim 7Q & Sim 7Q Hc); Lamp Insertion (Sim 7Q Hb & Sim 7Q Hb&C) - Barco SIM 7Q HB User Manual

8. Maintenance
8.4.2

Lamp installation

Necessary tools
Torx screwdriver T10

Installing the lamp

1. Open the lamp locking system by lifting the handle.
Image 8-26

Open lamp locking system

2. Slide the lamp in the projector in the correct orientation: the connector towards the projector's front side.
Image 8-27
Lamp insertion (SIM 7Q & SIM 7Q HC)
Image 8-28
Lamp insertion (SIM 7Q HB & SIM 7Q HB&C)
3. Release the lamp locking handle and firmly push the bottom side of the lamp (1) until it is locked ("click").
248 R59770066 SIM 7Q SERIES 07/10/2013