REED VALVE INSTALLATION
• Install the reed valve 1 and reed valve guide 2 direction as
shown.
' Reed valve guide bolt: 4.5 N·m (0.45 kgf-m, 3.0 lb-ft)
CRANKSHAFT INSTALLATION
• Fit the crankshaft into the left crankcase with the special tools.
NOTE:
Use the attachment (inner driver attachment 3) for crankshaft
bearing inside diameter.
" 09910-32812: Crankshaft installer 1
09911-11310: Crankshaft installer attachment 2
09913-70210: Bearing installer set
(Inner driver attachment 30 mm 3)
1 Reed valve
2 Reed valve guide
A Crankcase
TRANSMISSION AND CRANKSHAFT
10-13