Suzuki RM-Z250 Owner's Service Manual page 87

• Remove the drive chain clip M and release the drive chain.
• Remove the snap ring N and engine sprocket O.
# 09900-06107: Snap ring pliers
• Remove the engine mounting upper brackets P, left and
right.
• Remove the engine mounting front brackets Q, left and right.
• Remove the engine mounting bolt and nut R.
• Remove the swingarm pivot shaft nut and washer.
• Extract three quarters of the swingarm pivot shaft so as to
keep the swingarm in position.
NOTE:
The swingarm will come off when the swingarm pivot shaft is
completely removed.
• Remove the engine from the frame.
ENGINE REMOVAL AND INSTALLATION 5-5