Suzuki RM-Z250 Owner's Service Manual page 147

• Align the pin groove A with the pin B when installing the
stopper plate 5.
• Apply a small quantity of THREAD LOCK to the gearshift cam
driven pin 6 and tighten it to the specified torque.
% 99000-32050: THREAD LOCK "1342"
$ Gearshift cam driven pin: 24 N·m (2.4 kgf-m, 17.5 lb-ft)
• Fit the springs 7, pins 8 and pawls 9 to the gearshift cam
driven gear 0. Wider side C of pawl should be positioned
outside.
• With the pawls held in pushed position, install the pawl lifter
A.
GEARSHIFTING 9-6