Suzuki RM-Z250 Owner's Service Manual page 265

• Tighten the handlebar holder set nuts to the specified torque.
& Handlebar holder set nut: 44 N·m (4.4 kgf-m, 32.0 lb-ft)
• Apply grease to the throttle cable and their hole.
( 99000-25010: SUZUKI SUPER GREASE "A"
• Align the matching mark D on the handlebars with the throttle
holder matching surface.
• Tighten the screws securely.
NOTE:
Make the cut-line of collar 2 to lower side.
• Align the matching mark E on the handlebars with the master
cylinder matching surface.
• Tighten the lower bolt first temporarily to provide clearance on
the upper side and then tighten both the bolts to the specified
torque. (!19-30)
& Master cylinder holder bolt :
(or equivalent grease)
(Lower): 12 N·m (1.2 kgf-m, 8.5 lb-ft)
(Upper): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
FRONT FORK AND STEERING 17-24