Cylinder Head Removal - Suzuki RM-Z250 Owner's Service Manual

6-4 CYLINDER HEAD, CYLINDER AND PISTON
• Remove the cam chain tension adjuster cap bolt 3, washer,
bar and spring.
• Remove the cam chain tension adjuster 4.
• Remove the camshaft journal holders 5.
NOTE:
Loosen the camshaft journal holder bolts diagonally.
• Disengage the camshafts 7 from cam chain 6.
• Remove the dowel pins and C-rings 8.
Do not drop the cam chain 6, dowel pins and C-rings
8 into the crankcase.

CYLINDER HEAD REMOVAL

• Remove the camshafts. (!above)
• Remove the spark plug. (!2-7)
• Remove the carburetor. (!12-5)
• Drain engine coolant. (!13-3)
• Remove the exhaust pipe 1 and gaskets.
• Loosen the clamp and disconnect the radiator hose 2.
• Remove the engine mounting upper brackets.
CAUTION