Installation - Suzuki RM-Z250 Owner's Service Manual

Hide thumbs Also See for RM-Z250:
Table of Contents

Advertisement

7-6
CLUTCH
PUSH ROD
• Inspect the push rod for wear and damage.
• If any defects are found, replace the push rod with a new one.
RELEASE BEARING
• Inspect the clutch release bearing for any abnormality, partic-
ularly cracks, to decide whether it can be reused or should be
replaced.
• Smooth engagement and disengagement of the clutch
depends on the condition of this bearing.

INSTALLATION

Install the clutch plates in the reverse order of removal. Pay
attention to the following points:
• Install the spring washer seat 1 and spring washer 2 onto
the clutch sleeve hub correctly.
• Apply engine oil to the drive plates 3 and driven plates 4.
• Install the clutch drive plates and driven plates one by one
into the clutch sleeve hub in the prescribed order as shown in
illustration.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents