Cylinder Removal - Suzuki RM-Z250 Owner's Service Manual

• Remove the cylinder head base nuts 3.
• Loosen the cylinder base bolt 4.
• Remove the cylinder head bolts and washers.
NOTE:
When loosening the cylinder head bolts, loosen each bolt little
by little diagonally.
• Remove the cylinder head 5.
NOTE:
If the cylinder head does not come off easily, lightly tap it using a
plastic hammer.
• Remove the cylinder head gasket 6, dowel pins and cam
chain No.1 guide 7.
Do not drop the cam chain and dowel pins into the
crankcase.

CYLINDER REMOVAL

• Remove the cylinder head. (!above)
• Remove the cylinder 1 by removing the cylinder base bolt.
Do not drop the cam chain into the crankcase.
NOTE:
If the cylinder does not come off easily, lightly tap it using a plas-
tic hammer.
• Remove the cylinder gasket 2 and dowel pins.
CAUTION
CAUTION
CYLINDER HEAD, CYLINDER AND PISTON 6-5