Rear Caliper Reassembly And Installation - Suzuki RM-Z250 Owner's Service Manual

• Remove the caliper bracket 4 from the caliper.
• Remove the boots 5 and 6.
• Remove the spring 7.
• Wrap the caliper with a rag to prevent brake fluid scatter and
piston pop-out.
• Apply low-pressure air into the caliper through the hole to
remove the piston.
Fingers can get caught between piston and caliper
body when removing the piston.
Do not place your fingers on the piston when remov-
ing the piston.
• Remove the dust seal 8 and piston seal 9.
Brake caliper inspection and cleaning ($16-8)
REAR CALIPER REASSEMBLY AND
INSTALLATION
Reassemble and install the brake caliper in the reverse order of
removal and disassembly. Pay attention to the following points:
• Apply brake fluid to the new piston seal, new dust seal and
piston fit the piston seal, dust seal and piston.
! Specification and classification: DOT 4
" WARNING
FRONT AND REAR BRAKES 16-10