Oil Seal Installation; Oil Pump Removal - Suzuki RM-Z250 Owner's Service Manual

OIL SEAL INSTALLATION

• Install the oil seal and snap ring 1.
Replace the oil seal and snap ring 1 with new ones.
" 09913-70210: Bearing installer set
Oil seal: # 22 Attachment
09900-06108: Snap ring pliers
• Apply grease to the oil seal lip.
$ 99000-25010: SUZUKI SUPER GREASE "A"

OIL PUMP REMOVAL

• Drain engine oil. (!2-12)
• Drain engine coolant. (!13-3)
• Remove the brake pedal. (!16-18)
• Remove the kick starter lever and right crankcase cover.
(!8-3)
• Remove the clutch component parts. (!7-8)
• Remove the magneto cover. (!14-11)
• Hold the crankshaft immovable with the special tool.
(!10-3)
" 09930-44560: Rotor holder
• Remove the primary drive gear nut, washer and primary drive
gear 1. (!10-3)
• Remove the snap ring 2, washer 3 and oil pump idle gear
4.
" 09900-06107: Snap ring pliers
• Remove the oil pump 5.
CAUTION
(or equivalent grease)
LUBRICATION SYSTEM 11-4